Home > All Products > MDrive Intelligent Motors > Liberty MDrive Linear Motion Products
Liberty* MDrive (LMD) Linear Motion Products
Integrated motor, drive electronics and linear mechanicals
Product Selector
Products
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: CAN Bus 2.0B | Protocol: CANopen DS301, DSP402
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: CAN Bus 2.0B | Protocol: CANopen DS301, DSP402
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: Ethernet TCP/IP | Protocol: Ethernet/IP, Profinet IO, Modbus/TCP or MCode OS over TCP/IP
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: CAN Bus 2.0B | Protocol: Ethernet/IP, Profinet IO, Modbus/TCP or MCode OS over TCP/IP
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: RS-422/485 | Protocol: MCode OS streaming commands or locally stored programs
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +48 | Interface: RS-422/485 | Protocol: MCode OS streaming commands or locally stored programs
Feedback Loop: Open or Closed
Input VDC: +12 to +48 | Interface: RS-422/485 | Protocol: Software configurable parameters
Feedback Loop: Open or Closed
Input VDC: +12 to +48 | Interface: RS-422/485 | Protocol: Software configurable parameters
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: CAN Bus 2.0B | Protocol: CANopen DS301, DSP402
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: CAN Bus 2.0B | Protocol: CANopen DS301, DSP402
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: CAN Bus 2.0B | Protocol: Ethernet/IP, Profinet IO, Modbus/TCP or MCode OS over TCP/IP
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: Ethernet TCP/IP | Protocol: Ethernet/IP, Profinet IO, Modbus/TCP or MCode OS over TCP/IP
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: RS-422/485 | Protocol: MCode OS streaming commands or locally stored programs
Feedback Loop: Open, Closed or Absolute Encoder
Input VDC: +12 to +60 | Interface: RS-422/485 | Protocol: MCode OS streaming commands or locally stored programs
Feedback Loop: Open or Closed
Input VDC: +12 to +60 | Interface: RS-422/485 | Protocol: Software configurable parameters
Feedback Loop: Open or Closed
Input VDC: +12 to +60 | Interface: RS-422/485 | Protocol: Software configurable parameters
Overview
Robust Liberty MDrive (LMD) linear motion products integrate either a NEMA 17 or NEMA 23 stepper motor with external shaft linear actuator. Linear motion is produced by ACME screw/nut systems mounted to a motor’s driving shaft. Products include onboard drive electronics and controller with up to 8 I/O. Feedback options include open loop or closed loop with a 1000 line (4000 count/rev) internal incremental or multi-turn absolute encoder with hMT closed loop performance.
This high degree of integration can reduce machine complexity, size and cost in many stepper and servo motor applications. Liberty MDrive delivers exceptional performance and smoothness with advanced current control. Ideal for machine builders who want an optimized motor with onboard electronics.
External Shaft Linear Actuator
OEMs who want to reduce machine size, cost and complexity will find robust LMD Linear Actuator products deliver exceptional performance and value for many linear motion applications.
Communications and networking
Supported communication protocols include:
- Ethernet: EtherNet/IP, Profinet, ModbusTCP
- CANopen
- RS-422/485
Select
Downloads
Download file
Version
Select Accessory
Accessories
MD-CC404-000 communication converter kit USB to RS-422/485 USB-pluggable converters set/program communication parameters in 32- or 64-bit. Pre-wired DB9 mating cable included. Applicable to: Liberty MDrive Programmable Motion Control, Pulse/Direction Part number: MD-CC404-000
MD-CC501-000 communication converter kit USB to CANopen USB to CANopen pluggable converters set/program communication parameters in 32- or 64-bit. Pre-wired DB9 mating cable and terminating resistor block included. Applicable to: Liberty MDrive CANopen Part number: MD-CC501-000
CK-14 Replacement Mating Connector Kit Connector Kit Kit includes one 2-pin power mate, and one set (2 pieces) 7-pin multi-function mates for Liberty* MDrive IP20 Pulse/direction models. Applicable to: Liberty MDrive Pulse/Direction Part number: CK-14
CK-15 Replacement Mating Connector Kit Connector Kit Kit includes one 2-pin power mate, and one set (2 pieces) 7-pin multi-function mates for Liberty* MDrive Motion Control, Ethernet TCP/IP and CANopen models. Applicable to: Liberty MDrive Programmable Motion Control, CANopen, Ethernet TCP/IP Part number: CK-15
MD-CC502-000 Communication Converter Kit USB to CANopen USB to CANopen pluggable converters set/program communication parameters in 32- or 64-bit. Includes converter, cable& terminating resistor plug. Applicable to: Liberty MDrive CANopen Part number: MD-CC502-000
MD-CS660-000 Y-Cable for CANopen Communications Interface Cable Connect multiple CAN units together in sequence with this Y cable. A termination plug, such as PLG-M12TP, is required at end of run. Applicable to: Liberty MDrive CANopen Part number: MD-CS660-000
PLG-M12TP bus termination (resistor) plug I/O Interface Cable Terminator Plug for CANopen IP65 products. Use with MD-CS660-000 Applicable to: Liberty MDrive CANopen Part number: PLG-M12TP
MD-CS600-000 Cordset Communications Interface Cable The MD-CS600-000 is a 5-position, A-coded M12 male with flying leads cable used to interface RS-422/485 communications to Lexium MDrive products. It is not required if the MD-CC405-000 USB to M12 communications converter is being used. Pre-wired shield … Applicable to: Liberty MDrive Programmable Motion Control, Pulse/Direction Part number: MD-CS600-000
MD-CS610-000 Cordset I/O Interface Cable The MD-CS610-000 is a 12-position, A-coded M12 female to flying leads cable used to interface I/O signals to Liberty* MDrive products. Pre-wired shielded cables with straight M12 connector end for interfacing logic and I/O. 10′ (3 m) M12 to flying lead … Applicable to: Liberty MDrive Programmable Motion Control, CANopen, Ethernet TCP/IP Part number: MD-CS610-000
MD-CS620-000 Cordset Power Interface Cable The MD-CS620-000 is a 4-position, B-coded M12 female with flying leads cable used to interface DC power to Liberty* MDrive products. Pre-wired shielded cables with straight M12 connector end for interfacing DC power. 10′ (3 m) M12 to flying leads cable … Applicable to: Liberty MDrive Programmable Motion Control, Pulse/Direction, CANopen, Ethernet TCP/IP Part number: MD-CS620-000
MD-CS630-000 Cordset I/O Interface Cable The MD-CS630-000 is a 12-position, A-coded M12 male with flying leads cable used to interface I/O signals to the Liberty* MDrive product. Pre-wired shielded cables with straight M12 connector end for interfacing logic and I/O. 10′ (3 m) M12 to flying l … Applicable to: Liberty MDrive Pulse/Direction Part number: MD-CS630-000
MD-CS640-000 Cordset Communications Interface Cable The MD-CS640-000 is a 4-position, D-coded M12 male to RJ45 cable used to interface an Ethernet network to a Liberty* MDrive product. .Pre-wired shielded cables with straight M12 connector end for interfacing an Ethernet network. 6.5′ (2 m) M12 to RJ45 … Applicable to: Liberty MDrive Ethernet TCP/IP Part number: MD-CS640-000
MD-CS650-000 Cordset Communications Interface Cable The MD-CS650-000 is a 5-position, A-coded M12 female with flying leads cable used to interface the CAN bus to Liberty* MDrive products. Pre-wired shielded cables with straight M12 connector end for interfacing a CAN network. 10′ (3 m) M12 to flying lea … Applicable to: Liberty MDrive CANopen Part number: MD-CS650-000
Planetary Gearbox Custom Product Option Powerful yet lightweight, suitable for complex production cycles due to low-friction bearing design and optimized lubrication. Straight and right angle configurations available in NEMA 17, 23 and 34 sizes as custom accessories for Novanta IMS motor and … Applicable to: Liberty MDrive, MDrive Plus, Hybrid Stepper Motor Part number: Contact factory for details
Absolute Encoder Backup Battery pack Mounting Hardware or Miscellaneous Accessory For Liberty* MDrive Products with Absolute Encoder The ICP0531 Encoder Back-up Battery Pack will provide back-up power for the Liberty* MDrive Absolute Encoder circuitry, retaining and updating the position data for a period of up to five (5) years. Th … Applicable to: Liberty MDrive Part number: ICP0531
*Previously Lexium
When it comes to your form, fit and function requirements, don’t settle. Get precisely what you need working with us. We know motion.
Contact us with any questions about how we can help you with your motion application or for assistance with your IMS products.
Browse our resource section and find the most useful tools and documents for all our products.
